High Quality Marine Development Heat Exchanger Plates

High Quality Marine Development Heat Exchanger Plates

The selection of plate heat exchanger plates mainly considers the heat transfer effect to be achieved and the pressure drop requirements:
1. If the pressure requirement is above 1.2Mpa, the herringbone ripple is selected in most cases
2. If the pressure drop requirement is small and the heat transfer effect of the plate heat exchanger is not high, flat corrugated can be selected
3. For conditions where pressure drop and heat transfer effect have certain requirements, hot mixing plates can also be selected.

There are many types of plate heat exchangers, which can be applied to different fields. In fact, this has a lot to do with the structure and accessories of different types of products. For example, the plate is an important part of the equipment, and its different choices can achieve different effects, so it is necessary to make a reasonable choice.
The most direct thing about the Gasket Plate Heat Exchanger is that it can be disassembled, usually the four import and export positions are on the same side of the frame plate. The four ports of the fully Welded Plate Heat Exchanger are the upper and lower and left and right positions on the side, because the welding process is used, so the frame itself can not be opened.

In short, when purchasing plate heat exchangers, we must make a reasonable choice according to the actual use conditions and the required heat transfer effect, and it is more fully to play a role.