Marine Development Gasket Plate Heat Exchanger Plate

Marine Development Gasket Plate Heat Exchanger Plate

Plate heat exchanger is a kind of efficient heat exchange equipment, usually used in refrigeration, chemistry, metallurgy, machinery, electric power and other industries and fields, is a different from ordinary electrical equipment. Brazed Plate Heat Exchanger is a type of heat exchanger, which is composed of a series of metal sheets with a certain corrugated shape.

plate heat exchanger plates play an important part of plate heat exchanger, plate heat exchanger plate design is our focus in the design of heat exchanger type to do.

Before disassembling the gasket plate heat exchanger, the original thickness of the plate group should be measured with a steel ruler, and the four corners of the upper and lower parts of the equipment should be measured and recorded respectively. This thickness should be restored as much as possible when reinstalling. If the number of plates is increased or decreased, the correct total thickness should be calculated first. The difference between the thickness after installation and the nominal value should be less than 1%, and the thickness of the above example should be between 491 and 501mm. Plate heat exchangers are usually compressed into a whole with 6 to 12 bolts. During installation and disassembly, these bolts should be evenly balanced on the ground tight or relaxed, and must not be loosened unevenly.